Advertisement
E [SYNC] Slow Synchro Mode
Set this mode to ON when you want
to take a clear photograph
of a
subject such as a person against an
evening backdrop.
In this mode, the flash is always used.
If you take a picture with Synchro set to ON, a
slower than usual shutter speed is used and the
camera shake warning is displayed. When you press the shutter button down
halfway, the viewfinder LED flashes green. If the LCD monitor is switched on, the
camera shake warning [W>] appears. In this situation, you should use a tripod to
prevent camera shake.
QUALITY
You can select any of 3 kinds of quality (image compression ratios), depending on the
type of shot. The number of shots available (™6P.80) varies depending on the image
quality you select. [NORMAL], [BASIC] or [FINE] appears on the LCD panel to
indicate the image quality setting.
Select [FINE] when you want better image quality and [BASIC] when you want to fit
more images on the SmartMedia.
Press the <SET> button.
The SET menu
appears on the LCD
monitor.
Select [QUALITY].
Use the <®> or <€ button to select
[QUALITY].
Advertisement
