Hisense AMW2-18U4RJC Technical & Service Manual page 140

17. DISASSEMBLY PROCEDURE
42K
Important: Before disassembly and assembly, make sure that the power to the system has been
disconnected and verified as voltage free.
Step
1. Remove the
external casing
2. Remove the motor
3. Remove the
compressor
4. Assemble the unit
Illustration
134
Handling Instruction
1. Remove the top cover, handle
and valve cover;
2. Remove the outer case and
right side plate.
1. Remove the blade nut and
then remove the blade;
2. Remove the motor from
the motor supporter.
1. Reclaim the refrigerant
from the entire system.
2. Unsolder the 4-way valve
piping assy from compressor.
3. Remove the compressor
mounting bolts.
4. Carefully remove the
compressor from chassis.
Assemble the unit in the
reverse order of disassembly.