Datavideo KMU-300 Instruction Manual page 28

If the problem persists, try the following:
 Temporarily shut down the anti-virus software or firewall.
 Make sure no other devices are connected to the LAN (wired or wireless) because this
may result in IP conflicts.
After trying all methods and if the problem is still not solved, the NVS-31 MARK IV video
streaming server offers the fixed IP feature that allows you to establish direct connection to
the NVS-31 MARK IV. The default IP address is 192.168.1.200.
This method allows you to configure the NVS device to the IP range of your network so that
you do not need a DHCP server to gain access to the NVS device.
 Connect your PC to the NVS device directly using an Ethernet cable (not necessarily a
crossover cable).
Next, change the network settings of your PC or laptop.
 Click START located at the bottom left corner of your screen.
 On the text bar, enter Network Connections then click the icon that appears.
 Double click the network adapter that connects your PC or laptop to the network.
 Click the "Properties" button.
 Select "Internet Protocol Version 4 (TCP/IPv4)" option and click the "Properties"
button.
 Check the "Obtain an IP address automatically" option.
 Enter IPv4 settings:
-
IP Address: 192.168.1.2
-
Subnet Mask: 255.255.255.0 (System default is 255.255.255.0)
-
Default Gateway: Not required for one-to-one connection.
28