Passwords; Date/Time Settings - Extron electronics DMP 128 Plus User Manual

Passwords

The Passwords panel displays the option to change the
password (see figure 50).
To change the password:
1. Click Set ( ).
1
The Passwords dialog box opens (see figure 51).
2. In the Password: field, enter the current password.
3. In the Confirm Password: field, enter the new password.
4. Click Apply to change the password.
Click Cancel to keep the password.
NOTES:
• An administrator password must be applied before a
user password can be applied.
•
The factory configured password for this device has
been set to the device serial number. Passwords are
case sensitive. Performing a Reset to Factory Defaults
removes the password.

Date/Time Settings

The Date/Time Settings panel displays the date, time, and time
zone information for the device (see figure 52).
• Click Sync to PC (
the date and time on the host computer.
•
Click Set Manually (
The Date and time Settings dialog box opens (see figure 53).
) to sync the date and time on the device to
1
) to set the date, time, and time zone,
2
Figure 50. Passwords
Figure 51. Change Password
Figure 52. Date/Time Settings
Figure 53. Date and Time Settings
DMP 128 Plus • Internal Web Page 73