2. For the LAN 1 and LAN 2 panels (see
field.
•
If DHCP is selected, all other fields are greyed out.
•
If Static is selected, fill out the IP Address, Subnet Mask, and Gateway fields.
3. For the VLAN panel (see
NOTE: VLAN panel is only available when VLAN is selected from the VoIP Interface drop-down list (see
figure
56,
).
1
Figure 57. VLAN Panel
a. Select the DHCP or Static radio button for the IP Address field.
•
If DHCP is selected, all other fields are greyed out.
•
If Static is selected, fill out the IP Address, Subnet Mask, and Gateway fields.
5. Select the LAN 1 VLAN or LAN 2 VLAN radio button.
6. Enter an appropriate VLAN ID tag in the VLAN ID field.
7. Click Apply (see
figure
QoS/LLDP-MED
The QoS/LLDP-MED tab allows users to set the PCP (Priority Code Point) and Differentiated Services Code Point
(DSCP) decimal value for layer 2 and 3 as well as enable or disable the Link Layer Discovery Protocol - Media
Endpoint Discovery (LLDP-MED) (see figure 58).
NOTE: Consult the VoIP system administrator before changing any QoS values.
Figure 58.
VoIP Network QoS/LLDP-MED Tab
figure
56,
and figure 57):
3
56,
) to save and apply the changes.
4
on page 75), select DHCP or Static for the IP Address
2
DMP 128 Plus • Internal Web Page
76