Dmx Linking; Configuration (Dmx); Dmx Starting Address; Dmx Channel Assignments And Values - Chauvet DJ LED Shadow User Manual

DMX Linking

The LED Shadow™ works with a DMX controller. Information about DMX is in the
CHAUVET®
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Set the product in DMX mode to control with a DMX controller.
Configuration
1.
(DMX)
2.
When selecting a starting DMX address, always consider the number of DMX channels the
DMX Starting
product uses. If you choose a starting address that is too high, you could restrict the
Address
access to some of the product's channels.
The LED Shadow™ uses 3 DMX channels, which defines the highest configurable
address to 510. If you are not familiar with the DMX protocol, download the DMX Primer
from www.chauvetlighting.com.
To select the starting address, do the following:
1.
2.
3.
4.

DMX Channel Assignments and Values

Channel

3-CH

1
2
3
Page 10 of 16
All manuals and user guides at all-guides.com
DMX Primer, which
Connect the product to a suitable power outlet.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Press <MENU> repeatedly until Addr shows on the display.
Press <ENTER> and d001–510 will show on the display.
Use <UP> or <DOWN> to select the starting address.
Press <ENTER>.
Function
001
040
080
Mode
120
160
200
240
000
Strobe Mode Speed
(When Ch. 1 is 001 039)
010
Auto Mode Speed
000
(When Ch. 1 is 040 239)
No Function
000
(When Ch. 1 is 240 255)
Intensity
000
is available from the
Value Percent/Setting
000 No function
Dimmer mode
039
Automatic mode 1
079
Automatic mode 2
119
Automatic mode 3
159
Automatic mode 4
199
Automatic mode 5
239
Sound-active
255
009 No strobe
255 Strobe speed (0
–100%)
255 Automatic mode speed (slow to fast)
No function
255
255 100
–0%
LED Shadow™ User Manual Rev. 6
Chauvet website