Dmx Linking - Chauvet DJ COLORband PiX ILS Quick Reference Manual

EN
Menu Map
Refer to the COLORband PiX ILS product page on
Mode
3-Ch
4-Ch
6-Ch
7-Ch
8-Ch
DMX Mode
9-Ch
12Ch
18Ch
36Ch
41Ch
ILS Mode iLS
Static Color C--
Programs P--
Speed S--
Sound Mode Snd
Sensitivity SenS
Manual
U--
Mode
Dimmer
dIM
Speed
RF Control SEt

DMX Linking

The COLORband PiX ILS can work with a DMX controller. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from
www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 472.
Master/Slave Connection
The COLORband PiX ILS uses the DMX data connection for its Master/Slave mode. Information about configuring the
COLORband PiX ILS for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
ILS Connection
The COLORband PiX ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated
Lighting System (ILS) ecosystem (patent pending). For more information about configuring the COLORband PiX ILS into
ILS mode, please refer to the User Manual available at www.chauvetdj.com.
RFC (Radio Frequency Control) and RFC-XL
The COLORband PiX ILS can be operated with the CHAUVET RFC and RFC-XL.
3
QUICK REFERENCE GUIDE
Programming Levels
d 1–510
d 1–509
d 1–507
d 1–506
d 1–505
d 1–504
d 1–501
d 1–495
d 1–477
d 1–472
iLS1–4
C 1–7
P 1–23
S. 1–100
Snd
u 0–100
r. 0–255
G. 0–255
b. 0–255
oFF
dIM1–3
RF
GP1–4
REST
www.chauvetdj.com for the latest menu map.
Description
3-channel, 1-zone DMX mode
4-channel, 1-zone DMX mode
6-channel, 2-zone DMX mode
7-channel, 1-zone DMX mode
8-channel, 1-zone DMX mode
9-channel, 3-zone DMX mode
12-channel, 4-zone DMX mode
18-channel, 6-zone DMX mode
36-channel, 12-zone DMX mode
41-channel, 12-zone DMX mode
Sets ILS mode
Static colors
Automatic programs
Automatic program speed
Sound-active program
Sound sensitivity
Combine red, green, and blue for a custom static color
Sets the dimmer speed
oFF Disables RFC remote control
Link to a single remote by pressing and holding <freeze>,
Link (RFC) or <BLACK OUT> (RFC-XL) until the display shows
PASS (success) or ErrO (failure)
PubL Public mode, control with any RFC or RFC-XL remote
Sets to an RFC-XL remote receiving group
Reset to factory default settings
COLORband PiX ILS QRG Rev. 3