When making connections to this or any other component, make sure all components are off. Turn off all systems’ power before connecting the PS Audio component to any other component. Make sure all cable terminations are of the highest quality.
0.1% THD. For musical peaks, the Trio can produce up to 150 watts per channel into 8 Ohms and 300 watts per channel into 4 Ohms. You should expect state of the art performance and sonics from any PS Audio product. The Trio What you can...
There are several ways to mount the A-100 Power Amplifi er: on a rack shelf, on the fl oor behind the loudspeakers or on shelf near your preamplifi er. If the Trio A-100 Series Power Amplifi er is to be placed on the fl oor or carpet, make sure the unit is Cautions not going to come in contact with water or cleaning solvents.
A-100 Power Amplifi er. Be sure to use a high quality well shielded and well regarded interconnect for this critical link. PS Audio makes an entire line of excellent choices for interconnects, perfectly matched to your equipment’s needs. Input impedance is 100K.
Should the A-100 Power Amplifi er cease to function, contact your dealer or PS Audio’s service center for help. Placement of the A-100 Power Amplifi er is not critical. Placement with respect to other equipment Placement? can be important.
If there is no sound and you are convinced the A-100 Power Amplifi er has power and its front panel light is lit, contact your dealer, distributor or PS Audio for further assistance. If there is an excessive amount of hiss or noise from the loudspeaker, it is probably not from the A-100 If there is a lot Power Amplifi...
A-100 Amplifi er is probably underrated for the type of speaker you are using. See your dealer or call PS Audio for advice on going to the next size power amplifi er.
Page 13
PS Audio dealer, distributor or agent. PS Audio will not honor this warranty without valid proof of purchase from an authorized PS Audio dealer, distributor or agent and or a valid serial number as proof the product is a valid PS Audio product manufactured by PS Audio International.
Page 14
PS Audio will fulfi ll the conditions of the warranty. Such product must be returned at the owner’s expense to the PS Audio factory, together with a photocopy of the bill of sale for that product, a detailed description of the problem, and any information necessary for return shipment.
Canada Service Department. 2. Insure and accept all liability for loss or damage to the product during shipment to the PS Audio factory and ensure all freight (shipping) charges are prepaid. The product may also be hand delivered to the California or Colorado facilities if arrangements with the Service Department have been made in advance.
Page 16
If you have If you feel your country’s authorized dealer or distributor is either unwilling or unable to service your PS Audio products, please contact our service department at service@psaudio.com or at the above problems contact numbers to discuss the situation.
Need help?
Do you have a question about the TRIO A-100 and is the answer not in the manual?
Questions and answers