Simpleway nnounce Micnode2 Hardware User's Manual page 8

Interface Settings
Interface configuration for the LAN A and LAN B ports is performed in the device configuration user interface after
successful login.
Choose between manual and auto mode setting:
•
Manual - user enters IP Address, Net Mask and default Gateway.
•
Auto - DHCP server needs to be available to obtain network settings automatically.
•
Off mode turns the port off
IMPORTANT: You will need the device's IP address, MAC address from your device.
NOTE: Navigate backwards or cancel your steps with the Back function in your browser.
A. Navigate in the left-
hand Menu to
the Interfaces section.
You can preconfigure
two LANs A and B, see
rear panel ports.
B. Configure the interface in the Manual mode or Auto mode (DHCP).
8