Advertisement
Recovery from USB
Micnode2 device recovery from USB provided by nnounce support team.
Note: Not all USB flash discs versions are compatible, use version 3.1 or older.
Insert USB stick to the USB port on the rear panel.
1.
Power on/off of the device by unplugging and again reconnecting the LAN cable on the rear panel.
2.
Progress and result are shown on device display.
3.
REMOVE USB stick.
4.
Finish the process by once more putting power supply (as in step 2).
5.
Firmware Update
Firmware update of your micnode2 device is available in the Maintenance section.
The installation file is provided by the nnounce support team.
A. Navigate in the
left-hand menu to
the Maintenance
section.
Click on the button
Update New in the
Firmware update
part.
18
Advertisement
Need help?
Do you have a question about the nnounce Micnode2 and is the answer not in the manual?
Questions and answers