Biddle STYLE2 COMPACT Series Installation Operation & Maintenance page 7

INVISIDOR STYLE COMPACT AIR CURTAIN: Installation, Operation & Maintenance Instructions
2
Back and inlet grille panels should only be fitted after all functional tests have been completed and
verified (See Commissioning).
For multiple air curtains joined together over a doorway a wall bracket must be fitted at each joining
point.
* It is the sole responsibility of the installer to ensure that all the fixing points and suspension
system used are suitable for the air curtain being installed.
Attention: For Stainless Steel units the inlet grille and back panels are coated in an easy to peel
protective film. Please ensure all the protective film is removed before the air curtain is put into service.
For clarity, all photographs in the instructions show the Stainless Steel sheet with the protective film
already removed.
Version 3.0 Page | 7