Wall Mounting - Biddle STYLE2 COMPACT Series Installation Operation & Maintenance

INVISIDOR STYLE
MOUNTING AND CONNECTING CONTROLLER
Mount the Touch Controller in a convenient position directly to the wall or onto a switch box.

Wall Mounting

Step 1 Press release button on side of Controller case and pull the back case away.
Step 2 Feed one end of the RJ control cable through the back case, secure it, then screw the back
case to the wall using suitable fixings (not supplied).
Step 3 Connect the RJ plug to the RJ socket on the PCB in the remote control.
Step 4 Refit the front case.
Switch box Mounting
Step 1 Press release button on side of Controller case and pull the back case away (Figure 1)
Step 2 Feed one end of the RJ control cable through the switch box, feed and secure the RJ control
cable through the back case and secure back case to switch box using 2 mounting screws (not
supplied).
Step 3 Connect the RJ plug to the RJ socket on the PCB in the remote control.
Step 4 Refit the front case.
Version 3.0
COMPACT AIR CURTAIN: Installation, Operation & Maintenance Instructions
2
Figure 1.
Figure 2.
Page | 14