fantastic furniture Como 2.0 Manual page 8

Step 6
You will need
4 x Dowels 3 x Cam Nuts
(H1) (H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4 x Dowels (H1) into the Left Side Panel (P3).
Insert 3x Cam Nuts (H4) into the Top Panel (P1) and
Rail (P6).
Secure the Top Panel (P1) and Rail (P6) to the Left Side
Panel (P3) by rotating the Cam Nuts (H4) so the arrows
point towards the incoming Cam Bolts (H3). Once in place,
tighten with the Phillips Head Screwdriver.
Step 7
You will need
1 x Dowel 1 x Cam Nut
(H1) (H4)
Phillips Head
Screwdriver
Insert 1 x Dowel (H1) into the Left Side Panel (P3).
Insert 1 x Cam Nut (H4) into the Rail (P7).
Secure the Rail (P7) to the Left Side Panel (P3)
by rotating the Cam Nut (H4) so the arrows point
towards the incoming Cam Bolt.
Once in place tighten with the Phillips Head Screwdriver.
fantasticfurniture.com.au
(P1)
H4
H1
H1
(P7)
H1
(P3)
(P6)
H4
H4
H1
H1
H4
(P3)
Page 8