Step 12
You will need
4 x Dowels
4 x Cam Bolts
(H1)
(H3)
4 x Cam Nuts
Phillips Head
(H4)
Screwdriver
Insert 4 x Cam Bolts (H3) into 2 x Rails (P8).
Insert 4 x Cam Nuts (H4) and 4 x Dowels (H1) into 2 x Rails (P9) as shown.
Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Secure 2 x Rails (P8) and 2 x Rails (P9) together, once in place tighten all
Cam Nuts with a Phillips Head Screwdriver.
Step 13
You will need
6 x Cam Nuts
Phillips Head
Screwdriver
(H4)
Insert 6 x Cam Nuts (H4) into the Rails (P8, P9) as shown.
Secure the Rails (P8, P9) to the Bottom Panel (P2) by rotating the Cam Nuts so
the arrows point towards the incoming Cam Bolts, once in place tighten with a
Phillips Head Screwdriver.
fantasticfurniture.com.au
(P8)
H3
(P8)
H1
(P9)
H4
(P8)
H3
x2
H1
H4
H4
H4
(P9)
H1
(P8)
H4
H4
(P2)
H4
(P9)
(P9)
H4
H1
(P8)
Page 11