Table of Contents
Advertisement
2.3
General
Risk of accidents due to non-compliance with the safety instructions!
Non-compliance with the safety instructions can be fatal!
•
Carefully read the safety instructions in this manual!
•
Observe the accident prevention regulations and any regional regulations!
•
Inform persons in the working area that they must comply with the regulations!
Obligations of the operator!
The respective national directives and laws must be complied with when operating the
machine!
•
Implementation of national legislation relating to framework directive 89/391/EEC on the in-
troduction of measures to encourage improvements in the safety and health of workers at
work and associated individual guidelines.
•
In particular, directive 89/655/EEC concerning the minimum safety and health requirements
for the use of work equipment by workers at work.
•
The regulations applicable to occupational safety and accident prevention in the country
concerned.
•
Setting up and operating the machine as per IEC 60974.-9.
•
Brief the user on safety-conscious work practices on a regular basis.
•
Regularly inspect the machine as per IEC 60974.-4.
The manufacturer's warranty becomes void if non-genuine parts are used!
•
Only use system components and options (power sources, welding torches, electrode hold-
ers, remote controls, spare parts and replacement parts, etc.) from our range of products!
•
Only insert and lock accessory components into the relevant connection socket when the ma-
chine is switched off.
This document is part of the complete documentation and valid only in combination with all other
parts of these instructions! Read and observe the operating instructions for all system compo-
nents, especially the safety instructions!
099-000769-EW501
04.10.2022
Safety instructions
WARNING
CAUTION
General
7
Advertisement
Table of Contents
Need help?
Do you have a question about the RINTX12 STANDARD and is the answer not in the manual?
Questions and answers