Process Signals; Welding Data Monitoring Signals - EWM RINTX12 STANDARD Operating Instructions Manual

Overview of plug (jumper) configurations

Process signals

7.5 Process signals
Relay outputs (X7, 12 pole)
Pin no.:
X7/1
X7/2
X7/3
X7/4
X7/5
X7/6
X7/7
X7/8
X7/9
X7/10
X7/11
X7/12
7.6

Welding data monitoring signals

Relay outputs (X8, 12 pole)
Pin no.: Function / Meaning
X8/1 Welding voltage moni-
toring
process active
X8/2
X8/3
X8/4 Welding current moni-
toring,
main current signal ac-
X8/5
tive
X8/6
Wire speed monitoring
X8/7
or workpiece detec-
tion
Workpiece detection
X8/8
X8/9
X8/10 Motor current monitor-
ing
I>0 auxiliary process
X8/11
X8/12
Only for Titan XQ, Phoenix XQ, Phoenix and alpha Q machine series.
[1]
Only for Tetrix XQ, Tetrix and forceTig machine series.
[2]
38
Function / Signal form for
RINT X12
Meaning
I>0 Relay output 1
I>0 Relay output 1
I>0 Relay output 1
ready for welding Relay output 2
ready for welding Relay output 2
ready for welding Relay output 2
Sticking Relay output 3
Sticking Relay output 3
Sticking Relay output 3
Error Relay output 4
Error Relay output 4
Error
Signal form for
RINT X12
Relay output 5
[1]
[2]
Relay output 5
Relay output 5
Relay output 6
Relay output 6
[2]
Relay output 6
Relay output 7
[1]
[2]
Relay output 7
Relay output 7
Relay output 8
[1]
[2]
Relay output 8
Relay output 8
Standardisation / Logic
2-3 -> I=0
1-3 -> I>0
5-6 -> not ready
4-6 -> ready
8-9 -> no fusing
7-9 -> fusing
2)
11-12 -> error
10-12 -> no error
Standardisation / logic
2-3 -> welding voltage OK
2-3 -> end of process
1-3 -> welding voltage error
1-3 -> process active
5-6 -> welding current OK
5-6 -> main current phase not active
4-6 -> welding current error
4-6 -> main current phase active
8-9 -> wire speed
[1]
8-9 -> electrode/cold wire has not been
touched
[2]
7-9 -> wire speed error
7-9 -> electrode/cold wire touched work-
piece
[2]
11-12 -> motor current OK
11-12 -> I = 0 auxiliary process
10-12 -> motor current error
10-12 -> I = 0 auxiliary process
099-000769-EW501
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[2]
[1]
[1]
[2]
[1]
[2]
04.10.2022