Controls & Components - Grizzly EXTREME Series Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Like all machinery there is potential danger
when operating this machine. Accidents
are frequently caused by lack of familiarity
or failure to pay attention. Use this machine
with respect and caution to decrease the
risk of operator injury. If normal safety
precautions are overlooked or ignored,
serious personal injury may occur.
No list of safety guidelines can be com-
plete. Every shop environment is different.
Always consider safety first, as it applies
to your individual working conditions. Use
this and other machinery with caution and
respect. Failure to do so could result in
serious personal injury, damage to equip-
ment, or poor work results.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
-4-
manual BEFORE
Controls
A
D
Figure 1. Controls.
A. AIR PULSE CLEAN Button: Pulses com-
pressed air to clean canister.
B. ON Button: Turns machine ON when
pressed.
C. OFF Button: Turns machine OFF when
pressed.
D. Pressure Gauge: Displays vacuum pres-
sure, indicating filter efficiency. Remove and
clean canister filter when operating pressure
exceeds 6" of water. Replace filter when
cleaning does not improve performance.
Air Components
E
F
Figure 2. Air components.
E. Air Inlet: Accepts
connect coupler attached to proper air supply
equipment. Incoming air pressure should not
exceed 90 PSI.
Drain Valve: Drains built-up moisture from
F.
air pressure tank when ball valve is opened.
Model G0966 (Mfd. Since 04/23)
B
C
⁄ " NPT industrial quick-
1
4