Specifications Of Htl Interface Board; Specifications Of Power Supply Unit - HEIDENHAIN PWM 8 Operating Instructions Manual

8.7 Specifications of HTL Interface Board

Maximum input voltage:
Maximum input frequency:
Note:
The maximum input frequency only stands for the cutoff frequency of the square-wave input at PWM 8
(signal source: frequency generator).
Measure U/I:
Measuring range
Measuring range
Tolerance:
Measure amplitudes:
Measuring range
Measuring range
Resolution:
Measuring frequency:
Tolerance:
Terminating resistance:
From encoder signal to U-MSYS
From encoder signal to GND
Special feature of HTL interface board:
If the inverted are missing at the encoder output, they are generated internally and output
at the encoder output.

8.8 Specifications of Power Supply Unit

Input voltage:
Output voltage:
Protection grade:
Maximum ambient temperature:
current:
voltage:
high level:
low level:
0 - 30 V
approx. 2 MHz
0 - 500 mA
0 - 30 V
± 5 %
17.5 - 22.5 V
0 - 7.5 V
100 mV
10 Hz - 200 kHz
± 100 mV
1200 Ω
1200 Ω
100 - 240 V ac, 50 - 60 Hz
24 V dc, 1.0 A
1
40 °C
- 42 -