Safety; Specifications - HEIDENHAIN ND 1202T TOOL-CHEK Installation Instructions Manual

ND 1202T TOOL-CHEK
Installation Instructions
Operating Instructions available at www.heidenhain.de

3. Safety

The following messages provide safety information for preventing personal injury and
product damage:
Read and understand these instructions before use to avoid the possibility of
personal injury or death.
Hazardous live parts may be exposed if the unit is opened. Do not open the
unit. There are no serviceable items inside.
The protection provided by the equipment may be impaired if used in a manner
not specified. Do not use this product in any way other than its intended use.
Notice
For safety, operation and handling of the unit, keep this document for future
reference.

4. Specifications

The ND 1202T TOOL -CHEK is an advanced evaluation unit for tool presetters. Use
the ND 1202T TOOL -CHEK to establish datums using a setting gage and measure
tool offset relative to nominal dimensions. This unit is designed for indoor use only.
The ND 1202T TOOL -CHEK components shall only be installed as described in these
instructions. Mounting, installation and maintenance are to be performed by qualified
personnel only.
Power input:
Replaceable fuses:
Environmental conditions
Operating temperature:
Storage temperature:
Relative humidity:
Altitude:
Protection:
Overvoltage category:
Pollution degree:
Mass:
12
AC 100 V ... 240 V (-15 % ... +10 %)
50 Hz ... 60 Hz (±3 Hz)
(max. 100 W)
T 1.6 A / 250 V, 5 mm x 20 mm,
Quantity: 2
0 °C ... 45 °C
-20 °C ... 70 °C
† 80 %
† 2000 m
IP00, front panel IP40
II, equipment intended to be supplied from the
building wiring
2
ND with stand: approx. 4.8 kg
ND with mounting adapter: approx. 2 kg
Safety symbols
Where the following safety symbols
appear on the product they alert you to
important safety information.
Symbol description
Refer to the accompanying
2
information or
documentation to protect
against personal injury or
damage to the unit
Earth (ground) terminal
6
Power switch "On (supply)"
3
position
Power switch "Off (supply)"
3
position