Switching The Ab And Cd Tracks For 1Vpp Encoders With Zn/Z1 - HEIDENHAIN PWM 8 Operating Instructions Manual

By pressing ESC in the menu for selecting the encoder input, the selected encoder is confirmed and the
PWM8 parameter list exited.

17.2.3 Switching the AB and CD tracks for 1Vpp encoders with Zn/Z1

Note:
As of software version 11:
With these measuring systems the track signals AB and CD can be switched in the INFO soft-key row
Parameter programming is not required.
Select parameter P9 using the arrow keys; press CHANGE to
switch to the menu for encoder selection.
In this example:
1 Vpp encoder with EnDat interface
Possibility of switching between AB incremental track and CD
commutating track in the INFO mode
- 72 -