Specifications Of Fst 2 - HEIDENHAIN PWM 8 Operating Instructions Manual

9.3 Specifications of FST 2

Sensitivity:
leak circuits ≤ 3MΩ
Test sequence
1.
2.
3. Ie0
4. Ie2
5. 0V/5V
6. Ie1
Test cycle
1 second
Power supply
9 V monobloc battery
Exchange the batteries every 2 years;
use leak-proof trademarked batteries (e. g. Alkaline)
Battery voltage
≥ 5.5 V
Below 5.5 V the tester is inoperative!
Current consumption
10 mA (in operation)
≤ 0.1 µA (quiescent current)
Cable lengths (depend on capacitance)
- 45 -