Items Supplied; Hardware; Adapter Cables Overview - HEIDENHAIN PWM 8 Operating Instructions Manual

16 Items supplied

16.1 Hardware

Interface board ~1 Vpp with Zn/Z1, EnDat, SSI

16.2 Adapter Cables overview

Adapter kit 1
Adapter Zn/Z1 IN
Adapter Zn/Z1 OUT
Adapter kit 2
Adapter EnDat/SSI IN
Adapter EnDat/SSI OUT
Adapter cables
Adapter cable with 12-pin PCB connector
for 1Vpp encoders with EnDat or SSI (Pos.Enc.EnDat)
Adapter cable with 14-pin PCB connector
for 1Vpp encoders with Zn/Z1 track (Pos.Enc.EnDat)
Adapter cable, 17/17-pin, PWM to motor (Pos.Enc.EnDat)
Adapter cable to IK115 interface board
5V voltage controller for cable lengths > 6m (Pos.Enc.EnDat);
HEIDENHAIN
5V voltage controller for cable lengths > 6m (Mot.Enc.EnDat);
SIEMENS
Adapter cable, 17/17-pin, PWM to motor (Mot.Enc.EnDat)
Adapter cable, 17/15-pin, PWM to subsequent electronics
(Mot.Enc.EnDat)
Adapter cable, 17/25-pin, PWM to subsequent electronics
(Mot.Enc.1Vss)
Adapter cable, 17/25-pin, PWM to subsequent electronics
(Mot.Enc.EnDat)
Adapter cable, 17/17-pin, PWM to motor (Pos.Enc.EnDat)
Note:
For connection via the flange socket of the motor encoder always use the adapter kit (1 or 2)!
(SIEMENS pin layout adapted to HEIDENHAIN pin layout)
- 67 -
Id.No. 312186-xx
Id.No. see section
349312-01
349312-02
349312-03
349312-04
349839-xx
330980-xx
323897-xx
324544-xx
370225-01
370224-01
340302-xx
332115-xx
289440-xx
336376-xx
336847-xx
18.9.1
18.9.1
18.9.2
18.9.2
18.10.1
18.10.2
18.11
18.12
16.4
16.5
18.13
18.14
18.15
18.16
18.17