Errors - Star SP742 Series Hardware Manual

5-3. Errors

1) Recoverable error
Error Description
Paper end error
Printer cover open
error
Front cover open
error
Head high tempera-
ture detection
Board high tem-
perature detection
Cutter error (on
models with cutter)
Mechanical error
(other than cutter
error)
Black mark detec-
tion error
Link disconnection
detection (Physical
link disconnection)
Link disconnection
detection (IP ad-
dress lost)
*1 Automatically recovered by loading a new paper roll, then closing the printer cover.
*2 Automatically recovered by closing the printer cover.
*3 Automatically recovered by closing the front cover.
*4 Automatically the printer is recovered after the print head has cooled.
A print head temperature error is not abnormal.
*5 Automatically the printer is recovered after the board has cooled.
POWER lamp
On
On
Flashes (On: 0.5
sec./Off: 0.5 sec.)
Flashes (On: 1 sec./
Off: 1 sec.)
Flashes (On: 2 sec./
Off: 2 sec.)
On
On
On
Flashes at 2-second
intervals
Flashes at
0.125-second in-
tervals
ERROR lamp
Flashes (On: 1
sec./Off: 1 sec.)
On
On
Off
Off
Flashes (On: 0.125
sec./Off: 0.125 sec.)
Flashes (On: 0.25
sec./Off: 0.25 sec.)
Flashes (On: 0.5
sec./Off: 0.5 sec.)
Flashes at 2-second
intervals
Flashes at
0.125-second in-
tervals
– 23 –
Buzzer
4 short beeps (0.13
sec.) repeated twice
Beep
Beep
None
None
3 short beeps (0.13
sec. + 0.13 sec. +
0.5 sec.)
2 short beeps (0.13
sec. + 0.5 sec.)
3 short beeps (0.13
sec. + 0.13 sec. +
0.13 sec.)
—
—
Recovery
Conditions
*1
*2
*3
*4
*5
*6
*7
*8
*9
*10