Turning Power On - Star SP742 Series Hardware Manual

3-5. Turning Power On

Make sure that the Power cord has been connected as described in "3-4. Connecting the Power Cord".
Turn ON the power switch located on the front of the printer.
The POWER lamp on the control panel will light up.
CAUTION
We recommend that you unplug the printer from the power outlet whenever you do not plan to use it for long
periods. Because of this, you should locate the printer so that the power outlet it is plugged into is nearby and
easy to access.
When an Switch blind is affixed to the printer above the power switch, the ON/OFF marks of the power switch
may be hidden. If this occurs, remove the power cord from the outlet to turn the printer OFF.
Power switch
– 10 –