Table of Contents
Advertisement
IMPORTANT: For installations in walls
deeper than 13-7/8", consult your Ice Air
Sales Representative to prevent problems
with rain water, condensate drainage and
intake/discharge air.
1. Once you've determined the proper
location, create a wall opening to install
the wall sleeve measuring a minimum of
16 3/4" high x 42 3/8" wide.
Masonry Wall Construction Sleeve Dimensions
42.000
"
"
26.000
42.625
"
TOP VIEW
A
A
FRONT VIEW
Panel/Window Wall Construction Sleeve Dimensions
42.000 "
23.875 "
TOP VIEW
A
A
FRONT VIEW
Due to Ice Air's ongoing product development programs, the information in this document is subject to change without notice.
2. Before installing the unit, check the wall
opening to be sure the wall sleeve will
slide into the opening unobstructed.
3. For masonry walls, a lintel must be used
to provide support over each opening.
NOTE: Installer must determine and supply
the mounting bolts and/ or screws to attach
the wall sleeve to the sides of the wall
opening. Make sure the wall opening is
adequate for strong support.
"
12.250
11.298
"
16.000
"
16.202
SECTION A-A
1.125 " (TYP)
4.000 "
1.512 " (TYP)
.625 "
11.250 "
1.125 "
1.000 "
16.000 "
16.380 "
12.000 "
4.000 "
PITCH 1/4" TOWARD REAR
SECTION A-A
6
ISOMETRIC VIEW
"
16.379
"
ISOMETRIC VIEW
.250 "
.750 "
1.125 "
REAR VIEW
Advertisement
Table of Contents
