Table of Contents
Advertisement
Contents
General/Safety Information .......................... 2
Overview/Application Note/Inspection ........ 3
General Specifications ................................. 3
Before You Begin .......................................5-6
Sleeve Installation .................................. 7
Sleeve Installation .................................. 8
Installing the Louver (Optional) .................... 9
Assembly (Optional) .............................. 10
Installing the Chassis ................................ 11
General Wiring Diagram ............................. 14
Product Nomenclature ................................ 15
Warranty/Contact Information ................... 16
Due to Ice Air's ongoing product development programs, the information in this document is subject to change without notice.
Thank you for purchasing and installing the Ice Air PTAC (Package
Terminal Air Conditioner). Ice Air is a leading supplier of PTACs,
offering replacement air conditioners and heat pumps that are
interchangeable with units no longer available from the original
manufacturer. Our units are engineered to fit perfectly within the
existing wall sleeve, thereby reducing installation time
and expense.
This is a general guide only, and should be treated as such. The
information contained in this manual, including but not limited to
installation instructions, unit dimensions, and physical/performance
data, may vary by project and unit configuration. Ice Air will not be
held liable for any information contained in this manual. For questions
about installation and unit performance, please contact your local
Ice Air representative. Installation and start-up should always be
performed by a trained professional.
ATTENTION INSTALLING PROFESSIONAL
Read this manual and familiarize yourself with the specific items and
safety warnings that must be adhered to before attempting to install
or service this unit. Precautions listed are intended as supplemental
to existing practices. As a professional, you have an obligation to
know the product better than the customer. This includes all safety
precautions and related items. It is your responsibility to install the
product safely and to know it well enough to be able to instruct a
customer in its safe use as required.
p
!
RECOGNIZE THIS SYMBOL AS A SAFETY PRECAUTION.
p
WARNING: Ice Air will not be responsible for any injury or
!
property damage arising from improper service or service
procedures. If you install or perform service on this unit, you
assume responsibility for any personal injury or property
damage which may result. Many jurisdictions require a license
to install or service heating and air conditioning equipment.
p
WARNING, HIGH VOLTAGE: Disconnect all power before
!
servicing or installing unit. Multiple power sources may be
present. Failure to do so may cause property damage,
personal injury or death.
To ensure that the unit operates safely and efficiently, it must be
installed according to these installation instructions and all local
codes and ordinances utilizing the best standards and practices at
the time of installation or, in their absence, with the latest edition
of the National Electric Code. The proper installation of this unit is
described in the following sections. Following the steps in the order
presented should ensure proper installation.
2
Advertisement
Table of Contents
