Installing The Enclosure And Enclosure - ICE AIR RSNU Installation Manual

Installing the Enclosure and
Enclosure Front Cover
A
A
Due to Ice Air's ongoing product development programs, the information in this document is subject to change without notice.
1. Align the enclosure over the sleeve.
2. While resting the enclosure in position,
measure the "A" dimension between the
bottom of its side panels and the floor.
3. Adjust the legs and secure them to the
enclosure.
54.000"
44.350"
TOP VIEW
FRONT VIEW
ENCLOSURE
ADJ. LEGS
ISOMETRIC VIEW
10.500"
10.000"
2.297"
22.000"
3.000"
7.500"
SECTION A-A
MOUNTING
STUDS
12
4. Attach the enclosure front cover to
the cooling chassis using screws in
the holes of chassis brackets and the
enclosure front cover.
5. Align the enclosure front cover with the
enclosure assembly and secure.
1.438"
.500"
14.500"
SLEEVE
WASHER & NUT