Viking E-1600A-BLT-EWP Technical Practice page 12

E-1600-02A
K-1600-EHFA
E-1600A
E-1600-45A
Connected" LED can be initiated manually or automatically. All programming parameters, including phone numbers and
location numbers, are stored in non-volatile memory. All units are phone line powered, requiring no batteries or external
power and are compatible with common Central Station Monitoring equipment.
The BLK-3-EWP provides high visibility indication of analog line status through a high pow-
ered one million candle power strobe light. The BLK-3-EWP is the ideal solution for the hear-
ing impaired and can be used equally well in loud warehouses or factories, where ringing
phones can not be heard. Alternatively, the BLK-3-EWP can be used to add emergency noti-
fication to pre-existing emergency phones by turning on the strobe light when the emergency
phone is in use.
The control module can be installed on any standard telephone line or analog PABX/KSU sta-
tion. The 1 million candle power strobe can be interfaced to flash on ringing, off-hook or a
combination of ringing and off-hook (line in-use). The LDB-3 ring/loop detect control module
is also available separately.
For incoming calls, the LSD-2 can route calls to the DEVICE 2 (PRIORITY) port using Caller ID, Distinctive Ring, or Quick
Call Back. All other calls will be routed to the DEVICE 1. Alternatively, the LSD-2 can be set up so that all inbound calls
are routed to the DEVICE 2 (PRIORITY) port.
P r o d u c t S u p p o r
P r o d u c t S u p p o r
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
such changes.
Fax Back Doc 217
12
E-1600-03B
E-1600-55A
Why pay for a dedicated line for your elevator/emergency phone or alarm panel?
The LSD-2 Line Sharing Device allows the user to share an existing phone line with
an emergency phone or other priority alarm device. This can save hundreds of dollars
a year over leasing a dedicated phone line. The LSD-2 can be used on any C.O. line
or analog PABX/KSU station.
An outbound call on the DEVICE 2 (PRIORITY) port takes priority over a call in
progress on the DEVICE 1 port. Any call in progress on the DEVICE 1 port will be dis-
connected for 2 seconds, returning dial tone to the DEVICE 2 (PRIORITY) port. A busy
signal is then sent to the DEVICE 1 port.
t L i n e . . . 7 1 5 . 3 8 6 .
t L i n e . . . 7 1 5 . 3 8 6 .
The 1600A Series ADA Compliant Emergency Phones are designed to
provide quick and reliable handsfree communication for any standard
analog telephone line or analog phone system station port. All 1600A
Series phones meet ADA requirements for elevator/ emergency tele-
phones, and can be programmed from any Touch Tone phone.
The phones can dial up to 5 programmable emergency num-
bers, as well as 2 central station numbers. In addition, the E-
1600-20A and E-1600-52A feature a second "INFO" but-
ton that will dial up to 3 non-emergency numbers.
The 1600A Series phones can be programmed to auto-
matically deliver a digital announcement to identify the
location of the emergency call. Alternatively, a DTMF
E-1600-20A
Touch Tone code may also be delivered.
Caller ID is not passed through the
8 6 6 6
8 6 6 6
Printed in the U.S.A.
to the devices.
F a x B a c k L i n e . . .
F a x B a c k L i n e . .
A "Call
7 1 5 . 3 8 6 . 4 3 4 5
. 7 1 5 . 3 8 6 . 4 3 4 5