Techmade DYNAMIC User Manual page 28

INSTRUCTIO
1. Charging instructions
Charge the device before use.
To recharge the device, insert the
USB port into a charger (5V 1A)
or PC and place the smartwatch
correctly on the charging base.
I notify:
1) Use the charger only on a flat and stable surface.
2) If there is an obstacle between the smartwatch and the
charging cable, the smartwatch may not charge properly.
3) After charging the smartwatch, disconnect the power (do
not leave the device charging for whole nights). To avoid
damaging the device, use only the supplied cable.
4) Do not use if the charging device is damaged.
5) Disconnect the charging device when cleaning the
smartwatch, during a thunderstorm or during a prolonged
period of non-use.
6) Do not attempt to disassemble or modify the smartwatch
and charging cable.
7) Do not twist or pinch the charging cable.