Toro Reelmaster 5010-H Operator's Manual page 58

Overview of the InfoCenter Display (continued)
Accessing Run Screens
1. From the Main Menu, press the right navigation button to access the Main Run Screen
displaying the fuel level and coolant temperature.
2. Press the right navigation button to scroll to the Secondary Run Screen displaying the
coolant temperature and generator temperature with RPM and voltage.
3. Press the right navigation button to scroll to the eReel Information Screen displaying
the reel current and speed for each of the 5 cutting units.
4. Press the right navigation button to scroll to the Energy Mode Screen displaying the
components, energy flow, and the direction while in operation.
Protected Menus
There are operating configuration settings that are adjustable within Settings of the display.
To lock these settings, use the Protected Menu.
Note:
At the time of delivery, the initial password code is programmed by your distributor.
Accessing Protected Menus
Note:
The factory default PIN code for you machine is either 0000 or 1234.
If you changed the PIN code and forgot the code, contact your authorized Toro distributor for
assistance.
1. From the Main Menu, scroll down to Settings
and press the select button.
Operation: Before Operation
G471349s
Page 5–11 3464-478 A