Lowering The Seat; Separating The Generator Cooling-Air Shrouds; Assembling The Generator Cooling-Air Shrouds - Toro Reelmaster 5010-H Operator's Manual

Lowering the Seat

1. Rotate the seat slightly, and lift the front prop rod out of the dent of the seat-support slot.
2. Carefully lower the seat until it latches securely.

Separating the Generator Cooling-Air Shrouds

1. Remove the 4 bolts
secure the upper
cooling-air shrouds.
2. Separate the shrouds and lift the upper shroud
to access the driveshaft grease fittings.

Assembling the Generator Cooling-Air Shrouds

1. Align the grooves in the upper
generator cooling-air shrouds with the
driveshaft-brush seal
the generator cover.
3464-478A
and 4 locknuts that
and lower generator
and lower
and the flange
Page 6–8
G414736
of
G414737
Maintenance: Pre-Maintenance Procedures