Using Dynamic Graph - Casio CFX-9800G Owner's Manual

Press (YES) to start the send operation,
or [A(NO) to abort without sending
anything.
EQ(YES)
tS CACI
* Pressing @ interrupts the send operation
and returns to the LINK Mode.
The following appears after the send oper-
ation is complete.
COMMUNICATION
COMPLETE ©
REG DATA
PRESS [ACI
"Press (@ to return to the LINK Mode.
The receiving unit goes directly into receive
standby. The actual receive operation starts
as soon as the sending unit starts to-send
data.
*Pressing G% interrupts the receive opera-
tion and returns to the LINK Mode.
The following appears after the receive
operation is complete.
PRESS CAC]
13-10 Using Dynamic Graph
The following procedures show how to send data using Dynamic Graph from one
CFX-9800G unit to another. You can send all of the Dynamic Graph data, or a specific
data item.
To send all data using Dynamic Graph
Send Unit Receive Unit
Starting from the LINK Mode, press the | Starting from the LINK Mode, press the
FI]{TRN) to enter the send mode. (F2})(RCV) to enter the receive mode.
—338—
Move the highlighting to Dynamic:Graph,
and press &) to specify it as the data type.
WOODODOOD®D
OOOO
&)
Press (F){ALL):to specify all data.
EQ(ALL)
Move the highlighting to Dynamic Graph,
and press & to specify it as the data type.
QWOWDOOO®QD
QWO@OOEH
Press [i)(ALL) to specify all data.
(FALL)
Press [F)(YES) to start the send operation,
or (NO) to abort without sending
anything.
(YES)
= CACI
"Pressing &@ interrupts the send operation
and returns to the LINK Mode.
The receiving unit goes directly into receive
standby. The actual receive operation starts
as soon as.the sending unit starts to send
data, .
*Pressing @ interrupts the receive opera-
tion and returns to the: LINK Mode.
—339—
4340087-13,