Casio CFX-9800G Owner's Manual page 116

Move the pointer using ®. and @. Holding-down either key moves the pointer at. high
speed.
Move the pointer to ine first intersection. "
®-o.
XI coordinates —f#=-2e 165951 Y=. "1659514
(F§\(Coord)
X coordinate only:
[F6)] (Coord)
Y coordinate only Yq
Move the pointer to the next intersection.
®-®
Y=8. 191489362
—196—
You can 'then use F3\(Coord) 'to view thé x and-y coordinate values: © 0 21°" :2 82+
© BlCoo) aes iw,
* H=1.H0B5(08 Y=0. 1514893
Finally, press (Fi)(Trace) again to-exit the Trace Function.
To move the trace between two graphs i
This operation can be used to trace multiple graphs on'the Same display. In'the COMP,
SD, REG, MAT-or TABLE Mode this operation can be used with up to, six graphs that
are layered using multi-statements or programming. In the GRAPH Mode, all graphs that
are drawn on the display can be traced.
'Example] To trace points on the following equations (using a multistatement):
y= (¥+2)(x-3)
yo2x-3
Use the following range parameters:
(s)(SET)F)(REC)@n) |
GES(CLS)ES
SOMO OMEasIS
tA ame es
ie be