Using Editor - Casio CFX-9800G Owner's Manual

*In the case of Function Mem, Matrix, and
Graph Function, the remaining number of
byies in the fourth line is not displayed.
Use the @) and @ keys to move the high-
lighting to the program area you want to
send. After you select the program area
press &¢) to start the send operation.
TO STOP
*CACI
*Pressing 8 interrupts the send operation
and returns to the LINK Mode.
After the send operation is complete, the
program selection display appears, so you
can send another program if you want.
In the case of Function Mem, Matrix, and
Graph Function, the remaining number of
bytes in the fourth fine is not displayed.
Use the @ and @ keys to move the'high-
lighting to the program area where you want
the received program to be stored. After you
select the program area press Gg to start the
receive operation.
B_emety
emrly
P3_ empty
*Pressing @% interrupts the receive opera-
tion and returns to the LINK Mode.
After the receive operation is complete, the
program area selection display appears, so
you can receive another program if you
want.
If Graph Function is selected when sending function data, any Table & Graph data pre-
vously stored will be deleted by the incoming data.
13-8 Using Editor
The following procedure shows how to send files using the Editor from one CFX-9800G
unit to another. You can send all of the Editor files or a specific file.
To send all files using Editor
Send Unit
Starting from the LINK Mode, press the
(N(TRN) to enter the send mode.
Move the highlighting to Editor, and press
to specify it as the data type.
OOH
® ®
Press (F)(ALL).to specify all files.
(F(ALL)
'Receive Unit
Starting from the LINK Mode, press the
(F2(RCV) to enter the receive mode. ©
Move the highlighting to Editor, and press
&¢ to specify it as the data type.
OOH
Press [EQ(ALL) to specify all files.
(N(ALL)
'ALL EDITOR FILES
To STOP 'CACI