Table of Contents
Advertisement
*By default, SG6428XHP is shipped with a PSM500-AC power supply module, and SG6654XHP is shipped
with a PSM900-AC power supply module. One more power supply module needs to be purchased
separately.
**Both PWR 1 and PWR2 can work simultaneously, or you can specify the primary power supply and the
backup power supply according to your needs. Generally the primary power supply takes priority over the
backup power supply.
***All 10 Gbps SFP+ slots can be used as uplink ports or stack ports.
For SX6632YF
LED
PWR1*
PWR2
SYS
FAN
MGMT
MST
Port 1-26
(When the SPD LED is on)
Port 27-32***
(When the SPD LED is on)
Port 1-32
(When the STK LED is on)
*By default, SX6632YF is shipped with a PSM550-AC power supply module installed respectively. One
more power supply module needs to be purchased separately.
**PWR1 is the primary power supply and it takes priority over PWR2.
***All 25 Gbps SFP28 slots can be used as uplink ports or stack ports.
Indication
Green On: The power supply works properly.
Green Flashing: The power supply module is not compatible with the switch.
Yellow On: The power supply works properly but the switch is powered by the other
power supply.**
Yellow Flashing: The power supply module is plugged in properly but there's is no
AC power input; abnormal power supply.
Off: No power supply module is inserted.
Flashing: The switch works properly.
On or Off: The switch works improperly.
Green: All the fans work properly.
Yellow: Not all the fans work properly.
On: A device is linked to the port.
Flashing: Transmitting or receiving data.
Off: No device is linked to the port.
On: The device functions as the master switch in the stack topology or it works
individually.
Off: The device functions as the member switch in the stack topology.
Green On: Running at 10 Gbps, but no activity.
Green Flashing: Running at 10 Gbps and transmitting or receiving data.
Yellow On: Running at 1 Gbps, but no activity.
Yellow Flashing: Running at 1 Gbps and transmitting or receiving data.
Off: No device is linked to the corresponding port.
Green On: Running at 25 Gbps, but no activity.
Green Flashing: Running at 25 Gbps and transmitting or receiving data.
Yellow On: Running at 10 Gbps/1 Gbps, but no activity.
Yellow Flashing: Running at 10 Gbps/1 Gbps and transmitting or receiving data.
Off: No device is linked to the corresponding port.
On: The port number indicates the unit ID in the stack topology.
Omada Stackable L3 Managed Switch
Introduction
05
Advertisement
Table of Contents
