Table of Contents
Advertisement
Omada Stackable L3 Managed Switch
Caution:
Sharp edges on the fan module may cause injury, so please operate with caution.
■
Make sure the damaged fan module is in place before you are going to replace it. DO NOT
■
unplug the damaged fan module until the replacement operation.
Do not use too much force in the replacement. If resistance is encountered or positions of
■
the fan module appear larger during installation, you must first remove the module and then
reinstall the module.
If the Retainer Clips cannot spring up naturally and the power module is blocked, it may be due
■
to the fan module is not installed properly. Please check carefully.
18
Installation
Advertisement
Table of Contents
