Related Manuals for TP-Link Tapo S210
Summary of Contents for TP-Link Tapo S210
- Page 1 User Guide Smart Light Switch 1 Gang 1 Way Tapo S210 ©2023 TP-Link 1910013286 REV1.0.0...
-
Page 2: Table Of Contents
Contents About This Guide ··········································································· 1 Introduction ······················································································ 2 Appearance ······················································································ 3 Set Up Your Switch ······································································· 4 Main Device Controls ·································································· 6 Schedule ···························································································· 8 Away Mode ····················································································· 10 Timer ·································································································· 12 Check Runtime············································································· 14 Device Sharing ············································································· 15 Smart Actions ···············································································... -
Page 3: About This Guide
• Specifications can be found on the product page at https://www.tapo.com. • Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/. • The switch installation and setup video can be found at https://www.tp-link.com/support/download/tapo-s210/. • The installation guide can be found at https://www.tp-link.com/support/faq/3360/. -
Page 4: Introduction
Introduction Make your traditional lighting smart with the Tapo Smart Switch. Turn your lights on and off with your voice, or control them from your phone. Thanks to the switch's battery-powered design with 1+ year battery life, enjoy the smart lifestyle without rewiring your home or replacing your current bulbs. The Tapo smart switch works with an Tapo hub. -
Page 5: Appearance
Appearance Blinking red quickly: Ready for connecting to the hub. Solid red for 5s: Connected to the hub. SYNC/RESET button Blinking 3 times when Press and hold for 5s: pressing the switch: Reset the switch and get ready Low battery. for connecting to the hub. -
Page 6: Set Up Your Switch
Step 3. Add Tapo Hub First Get the Tapo app from the App Store or Open the app, and log in with your TP-Link ID. Google Play, or by scanning the QR code If you don't have an account, create one first. Tap the button in the app and select your below. - Page 7 Step 4. Add Your Switch Step 5. Wire Your Switch Follow app instructions to wire your switch, or check the wiring diagram below. Tap the button in the app and select your switch. Then follow app instructions to set up Please make sure no bare wires are exposed after wiring.
-
Page 8: Main Device Controls
Main Device Controls After setting up your device successful, you will see your switch listed on the home page. You can manage it from anywhere at any time with the Tapo app. Home Page Status Page This page lists all your devices you've added and you can view them You can turn on or off your device in this page. - Page 9 Switch Settings Status page, tap to enter the Device Settings page. You can change your device name and icon, set Delayed Shut Off, etc.
-
Page 10: Schedule
Schedule Set schedules for your switch to automatically turn on/off at set times to simplify your daily routine. Step 2: on the top right corner. Step 1: Go to Status page and swipe upforward. Tap to set a schedule. - Page 11 Step 3: Set the time and frequency to turn on/off your device Done! automatically. You can see the set schedule listed in the Schedule page.
-
Page 12: Away Mode
Away Mode Set your device to turn on and off randomly during a set time period to make the appearance that someone is at home. Step 1: Go to Status page and swipe upforward. Tap to set Away Step 2: Set the time period and the repeating frequency. - Page 13 Done! Away Mode is active. Your device will be turned on and off randomly during the time period.
-
Page 14: Timer
Timer Set a countdown timer for your device to automatically turn on/off after the timer ends. Step 1: Go to Status page and swipe upforward. Tap to set a Step 2: Set the time period and whether to turn on or off the switch after the time ends. - Page 15 Done! The timer is counting down. You can also see the time counting down in the Home page.
-
Page 16: Check Runtime
Check Runtime Check how long the switch has been running today, for the past 7 days, or for the past 30 days. Go to Status page and swipe upforward. You can the runtime for today, past 7 days and past 30 days. -
Page 17: Device Sharing
Device Sharing Share your device to your family by entering their TP-Link ID. Go to Status page and swipe upforward. Then tap Device Sharing. Share and then enter the TP-Link ID of your family member. -
Page 18: Smart Actions
Smart Actions Smart Actions automate repetitive tasks, allowing you to blaze through tedium with utmost ease. Set everything up once and never have to worry about it again. With Smart Actions, giving your home that level of intelligence is a snap. Shortcut lets you perform an action with a simple tap. Automation allows you to automate tasks to be performed at a set time. - Page 19 Option 2: Create your own shortcuts 2. Add an action and choose whether to delay the action. 1. Go to Shortcuts page. Tap + on the top right to add a shortcut.
- Page 20 3. Name your shortcut and choose an icon and tap Done save all the settings.
- Page 21 Option 3: Create your own actions 2. Name the new action. Tap + to add conditions (When) like the trigger time, and tap + 1. Go to Automation page. Tap + on the top right to add a to add tasks (Then) like turning on the switch. simple and smart action.
- Page 22 3. Name your automation and set the effective time for the automation. Tap Done to save all the settings.
-
Page 23: Device Settings
Device Settings In the Device Settings page, you can edit the basic information, set delayed shut off and double tap effect, update firmware and more. 1: Change Device name, icon and location 2: Set Delayed Shut Off When Delayed Shut Off is enabled, you can press the switch to make In the Status page, tap... -
Page 24: How To Reset Your Switch
How to Reset Your Switch There are two methods to reset your switch. Method 1: Press the SYNC/RESET button on the switch 1. Slide the lock to the OPEN position. Then hold the faceplate and pull it away from the back to remove the faceplate. 2. - Page 25 Method 2: Remove the device in the Settings page Go to the Settings page of your switch. Tap REMOVE to remove your switch from Tapo.
-
Page 26: Authentication
The device complies with RF specifications when the device used at 20 cm from your body. UK Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. - Page 27 The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/ Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information Before installing, servicing or removing the switch, read and follow all safety precautions including the following: •...
- Page 28 CAUTION! Avoid replacement of a battery with an incorrect type that can defeat a safeguard. Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;...