HumanCentric 101-2100 Manual

Mac studio under desk mount

Mac Studio

Under Desk Mount

Model 101-2100

Full product speciﬁcations: www.humancentric.com/101-2100

Need help? Contact support: support@humancentric.com

To reduce the risk of injury to persons, read all important precautions and warnings listed below. HumanCentric

assumes no responsibility for personal injury or property damage sustained by or through the use of this product:

Read all instructions carefully.

Incorrect installation may lead to damages or serious injury. Ensure the product is secured before use.

Do not install on desks less than ¾" thick.

Phillips Screw Driver

Drill

1/8" Drill Bit

PARTS INCLUDED

A (x1)

Mounting Bracket

WARNING

www.humancentric.com/patents

B (x4)

M4 x 19mm Wood Screw

C(x2)

Cable Tie

www.humancentric.com

Table of Contents

Do you have a question about the 101-2100 and is the answer not in the manual?

Page 1 Need help? Contact support: support@humancentric.com WARNING To reduce the risk of injury to persons, read all important precautions and warnings listed below. HumanCentric assumes no responsibility for personal injury or property damage sustained by or through the use of this product: Read all instructions carefully.
Page 2 Tip: Use a piece of tape on the drill bit ½” from the tip to ensure the correct drill depth. USE 1/8” DRILL BIT > 3/4” < 3/4” Warning: Do not install on desks less than ¾” thick © 2023 HumanCentric Ventures LLC www.humancentric.com...
Page 3 Screw the bracket into the bottom of the desk using the four M4x19mm wood screws (B). Place the Mac Studio into the bracket from the front and rest it in the circular cutout. Warning: Do not slide the Mac Studio against the bracket side walls during installation. © 2023 HumanCentric Ventures LLC www.humancentric.com...