Removal Of Ac Inlet Assy; Removal Of Front Glass, V1, V3, V-Board And Cabinet Assy - Panasonic TH-85PB1E Service Manual

TH-85PB1E
6. Remove 6 screws ( ) and then remove C4-Board (lower).
Note: when fixing C-Board
When tightening the flexible cables, tighten a screw to the
one of the "A" positions and then tighten a screw to the
one of the "B" positions, and then tighten the remaining
positions.
* Order of "A to A" or order of "B to B" is no good.

8.27. Removal of AC Inlet Assy

1. Disconnect the connector (P9).
2. Remove 2 screws and then remove the AC Inlet.
3. Remove the 2 screws (G), AC Cord Clamper, AC Inlet
Cover and AC Inlet Holder from the AC Inlet Assy.
8.28. Removal of Front Glass, V1,
V3, V-Board and Cabinet Assy
1. Disconnect the connectors (A11).
2. Disconnect the Joint Connector.
3. Remove the Side Power Unit.
(Refer to Removal of S1-Board and V2-Board)
46