Removal Of C2-Board (Lower) - Panasonic TH-85PB1E Service Manual

TH-85PB1E
2. Disconnect the Speaker lead.
• Push the speaker terminal hook and pull out the speaker
lead (+).
3. Remove 2 screws and then remove the Rear Cover Fix-
ing Metal (lower_left).
4. Remove the flexible cable from the connector (C10).
5. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CA1, CA2, CA3, CA4).
• Pull out the flexible cable to the slanting above one.
6. Remove 6 screws ( ) and then remove C1-Board (lower).
Note: when fixing C-Board
When tightening the flexible cables, tighten a screw to the
one of the "A" positions and then tighten a screw to the
one of the "B" positions, and then tighten the remaining
positions.
* Order of "A to A" or order of "B to B" is no good.

8.24. Removal of C2-Board (lower)

1. Remove 2 screws and then remove the Rear Cover Fix-
ing Metal (lower_center).
2. Disconnect the connector (C25).
3. Remove the flexible cables from the connectors (C20,
C21, C22).
4. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CA5, CA6, CA7, CA8).
• Pull out the flexible cable to the slanting above one.
5. Remove 6 screws ( ) and then remove C2-Board (lower).
Note: when fixing C-Board
When tightening the flexible cables, tighten a screw to the
one of the "A" positions and then tighten a screw to the
one of the "B" positions, and then tighten the remaining
positions.
* Order of "A to A" or order of "B to B" is no good.
44