TH-85PB1E
2. Remove the flexible cables from the connectors (SD1,
SD2, SD3, SD4, SD5, SD6, SD11).
3. Disconnect the connectors (SD42, SD46).
4. Remove 5 screws ( ).
5. Remove 3 screws ( ) and then remove SD-Board.
Note: when fixing SD-Board
• Tighten the screws in order of (1) to (2), then tighten the
remaining screws.
8.13. Removal of SC-Board
1. Remove the Side Power Unit.
(Refer to Removal of S1-Board and V2-Board)
2. Remove 6 screws and then remove 2 Nuts for M12 Eye
Bolt (side).
3. Disconnect the connectors (SU41, SD42, SD46).
4. Remove 9 screws ( ).
5. Remove 6 screws ( ) and then turn over SU-Board and
SD-Board.
Note:
Do not damage the flexible cables of SU-Board and
SD-Board, and the parts on SC-Board.
Note: when fixing SU-Board and SD-Board
• Tighten the screws in order of (1) to (2), then tighten the
remaining screws.
6. Disconnect the connector (SC2).
7. Remove the flexible cable from the connector (SC20).
38