TH-60PF30W
7. Stick the Sponge in the upper part around Fan Block (B)
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
9.8.
Removal of P-Board (MAIN)
1. Disconnect the connectors (P9, P11, P16, P25, P34, P35,
P52, P54, P56).
2. Remove 9 screws and then remove P-Board (MAIN).
9.9.
Removal of P-Board (SUS)
1. Disconnect the connectors (P2, P51, P53, P55).
2. Remove 6 screws and then remove P-Board (SUS).
9.10. Removal of AC Inlet Assy
1. Disconnect the connector (P9).
2. Remove 2 screws ( ) and then remove the AC Cord
Clamper A.
3. Remove 1 screw ( ) and then remove the AC Inlet Assy.
9.11. Removal of H3-Board
1. Disconnect the connector (H37).
2. Remove 2 screws and then remove the Speaker Terminal
Block.
3. Remove 2 screws (A) and then remove H3-Board.
24