Removal Of C2-Board (Upper); Removal Of C3-Board (Upper) - Panasonic TH-85PB1E Service Manual

TH-85PB1E
3. Remove the flexible cable from the connector (C10).
4. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CA1, CA2, CA3, CA4).
• Pull out the flexible cable to the slanting above one.
5. Remove 6 screws ( ) and then remove C1-Board
(upper).
Note: when fixing C-Board
When tightening the flexible cables, tighten a screw to the
one of the "A" positions and then tighten a screw to the
one of the "B" positions, and then tighten the remaining
positions.
* Order of "A to A" or order of "B to B" is no good.

8.20. Removal of C2-Board (upper)

1. Remove the Eye Bolt (M12).
2. Remove 2 screws and then remove the Rear Cover Fix-
ing Metal (upper_center).
3. Remove the Fan Block (2).
(Refer to Removal of Fan)
4. Remove the flexible cables from the connectors (C20,
C21, C22).
5. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CA5, CA6, CA7, CA8).
• Pull out the flexible cable to the slanting above one.
6. Remove 6 screws ( ) and then remove C2-Board
(upper).
Note: when fixing C-Board
When tightening the flexible cables, tighten a screw to the
one of the "A" positions and then tighten a screw to the
one of the "B" positions, and then tighten the remaining
positions.
* Order of "A to A" or order of "B to B" is no good.

8.21. Removal of C3-Board (upper)

1. Remove the Rear Cover Fixing Metal (upper_center).
(Refer to Removal of C2-Board (upper))
2. Disconnect the connector (C35).
3. Remove the flexible cables from the connectors (C30,
C31, C32).
4. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CA9, CA10, CA11, CA12).
• Pull out the flexible cable to the slanting above one.
42