Removal Of P-Board; Removal Of Ac Inlet Assy - Panasonic TH-42PF30U Service Manual

TH-42PF30U
7. Stick the Fan Sponges around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
8. Remove 3 hooks and then remove Fan-Duct Barrier (A).
9. Disconnect the Fan Relay Connectors.
10. Remove 3 screws and then remove the Fan Block (B).
11. Turn over the Fan Block (B).
12. Remove 4 screws and then remove the Fan (D) from the
Fan Fixed Metal.
13. Remove 3 Rubbers.
8.8.

Removal of P-Board

1. Remove the Fan Block (A).
(Refer to Removal of Fan)
2. Disconnect the connectors (P2, P9, P11, P16, P25, P34,
P35).
3. Remove 7 screws and then remove P-Board.
8.9.

Removal of AC Inlet Assy

1. Disconnect the connector (P9).
2. Remove 2 screws ( ) and then remove the AC Cord
Clamper A.
24