Panasonic TH-85PB1E Service Manual page 25

Supplement 1: [The check of setting for malfunction of electronic pen]
[1] The check of whether the power is supplied without fitting optical attachment
Detach the optical attachment and then slide the power switch to "ON".
Cautions
If you removed the optical attachment with the power switch being in "ON", it becomes operation as a remote pointer.
When you use it as the electronic pen, please be sure to slide the power switch to "ON", with the optical attachment
detached.
[2] The check of whether the Touch Pen mode is set to ON in the setting of the display
It can be checked by OSD when the "Recall" button on the remote control is pressed on (Fig. 1) or a Touch Pen mode setting screen (Fig. 2).
Cautions
TOUCH-PEN MODE
Set [TOUCH & REMOTE] or [TOUCH ONLY].
SLOT INPUT - NETWORK
Set "ON" or "OFF" for each input terminal.
[TOUCH-PEN : ON] is displayed in Touch Pen mode.
The electronic pen cannot be used when VIDEO or COMPONENT input is selected.
The default of Touch Pen mode is OFF.
After carrying out the self check for initializing, or when a A board
is replaced, it is necessary to set Touch Pen mode to ON.
TOUCH-PEN
(Fig.1) OSD of touch pen setting
[3] The check of whether electronic pen is registered into the electronic pen adapter (pairing)
It judges by indicator (Fig. 3) of an electronic pen, and the OSD display at the time of pairing tool soft starting.
Indicators of electronic pen express the existence of the pairing information on an electronic pen adapter, and OSD of pairing
tool software expresses the existence of the pairing information on an electronic pen.
Pairing can be carried out when both pairing information is in agreement.
Indicator of an electronic pen
Power indicator
Off
Green blinking
OSD of pairing tool software
* : Cautions
When all the release is performed with a pairing tool using two or more pen, or when the same pen is being used with two
or more electronic pen adapters, and so on, since pairing may not be made, please check once again whether a character
can be drawn by electronic pen after carrying out pairing.
PC
FULL
NANODORIFT
ON
Function indicator
Alternately blinks green
and red
Off
25
TOUCH-PEN SETTINGS
TOUCH-PEN MODE TOUCH ONLY
OFF
SLOT INPUT
HDMI OFF
DVI OFF
OFF
PC
NETWORK OFF
(Fig. 2) Touch pen setting screen
Pairing
NG
OK *
Power
Pairing
indicator
(Fig.3)
NG
OK *
TH-85PB1E
Function
indicator
Indicator of an
electronic pen