4. Remove 4 Sponges (Fan Corner) from the Fan.
5. Reassemble the Fans in reverse order.
6. Stick the Fan Sponges around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
8.8.
Removal of P-Board
1. Disconnect the connectors (P2, P6, P9, P11, P35).
2. Remove 7 screws ( ).
3. Remove 1 screw ( ) and then remove P-Board.
8.9.
Removal of AC Inlet Assy
1. Disconnect the connector (P9).
2. Remove 2 screws ( ) and then remove the AC Cord
Clamper A.
3. Remove 1 screw ( ) and then remove the AC Inlet Assy.
8.10. Removal of H3-Board
1. Disconnect the connector (H27).
2. Remove the screws and then remove the Speaker Termi-
nal Block.
3. Remove 4 hooks and then remove the Edge Saddle.
4. Remove 2 screws (A) and then remove H3-Board.
31
TH-50PB2E