Removal Of C2-Board; Removal Of S1-Board; Removal Of Front Glass, V1, V2-Board And Cabinet Assy - Panasonic TH-50PH30E Service Manual

TH-50PH30E / TH-50PH30ER
8. Remove 4 screws ( ) and then remove C1-Board.

8.12. Removal of C2-Board

1. Remove the Fan Block.
(Refer to remove of Fan).
2. Remove the AC Inlet Block.
(Refer to remove of Slot Block).
3. Remove the A-Board Block.
(Refer to remove of SS-Board).
4. Remove 5 screws and then remove the Hanger Metal L
and the Stand Pole Bracket Assy (L).
5. Disconnect the connector (C25).
6. Remove the flexible cables from the connectors (C20,
C21, C23).
7. Remove 8 screws ( ) and then remove the flexible
cables from the connectors (CB5, CB6, CB7, CB8).
8. Remove 4 screws ( ) and then remove C2-Board.

8.13. Removal of S1-Board

1. Remove 2 screws (B) and then remove the S1-Board
Block.
2. Disconnect the connector (S34).
3. Remove 1 screw (C) and then remove S1-Board.
8.14. Removal of Front Glass, V1,
V2-Board and Cabinet Assy
1. Remove the Speaker Terminal Block.
(Refer to remove of Speaker Terminal Block).
2. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
3. Disconnect the connectors (A11, A22).
4. Remove 9 screws ( ).
5. Pull the bottom of the Plasma Display Panel forward
(arrow1).
6. Slide the Plasma Display Panel and then remove the
Plasma Display Panel (arrow2).
8.14.1. Removal of Front Glass
1. Remove 24 screws and then remove the Fixed Angle
(left, right, upper-rear, bottom-rear).
24