Advertisement
FIT AND SECURE
2
2.1
Left Hand Side
2.2
Left Hand Side
2.3
8
18
19
LAMG003_REV_A00
1
Right Hand Side
2
15
17
12
10
Right Hand Side
16
5
15
Torx
17
T30
5
13
14
8mm
10mm
13mm
11
4mm
3
The side the door opens will determine
which side the ladder will be installed.
If the rear door opens to the right hand side,
the ladder must be installed on the left hand
side of the vehicle as shown.
If the rear door opens to the left hand side,
the ladder must be installed on the right
hand side of the vehicle.
Identify the Ladder Top Clamp and Gutter
Clamp you will use during the ladder
assembly.
Item 1 = Left Hand Side identifier
Item 16 = Right Hand Side identifier
For the purpose of this fitment guide a left
hand assembly and installation will be
shown.
Loosely assemble the Stopper Bracket (Item
12) to the Bottom RH Support and Ladder
Side (Items 2 & 10), using a Rubber Buffer,
M5 x 16 Button Head Bolt, M5 Nyloc Nut and
M5 Nut Cap (Items 13, 14, 15 & 17).
Loosely assemble the Ladder Sides LH & RH
and Bottom LH & RH Supports (Item 2, 8 &
10) using M6 x 16 Flange Button Head Bolts,
M6 Nyloc Nuts and M6 Nut Caps (Items 5, 15
& 17).
Loosely assemble the Ladder Base Assembly
(Item 11) to the Bottom Support Plates
(Item 8 & 10).
© 2022 FRONT RUNNER VEHICLE OUTFITTERS
Advertisement
