Download Print this page
Front Runner LAMS002 Manual

Front Runner LAMS002 Manual

Mercedes sprinter ladder

Advertisement

Quick Links

ENG
front runner
MERCEDES SPRINTER LADDER
LAMS002
READ ME !
Thank you for purchasing Front Runner Mercedes Sprinter Ladder.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
LAMS002_REV_A02
1
© 2021 FRONT RUNNER VEHICLE OUTFITTERS

Advertisement

loading
Need help?

Need help?

Do you have a question about the LAMS002 and is the answer not in the manual?

Questions and answers

Summary of Contents for Front Runner LAMS002

  • Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
  • Page 2 M6 Jack Nut 27 X M6 Flat Washer 10mm 6.5mm 17mm M6 Spring Washer 17mm 12mm M6 x 20 Button Head Screw Ladder Rung - MS4 25 X M6 Nyloc Nut FIGURE 1.1 LAMS002_REV_A02 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 Joiner Plate (Item 10) to the Bottom LH Ladder Side using two M6x16 Button Head Screws, two M6 Flat Washers and two 10mm M6 Nyloc Nuts (Item 8, 15 & 19). LAMS002_REV_A02 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 Finish of by placing fourteen M6 Nut Caps (Item 20) on all the exposed M6 Nyloc Nuts. Remove backing and place the four Foam Rubber Pads (Item 7) onto the ladder's feet and trim to fit. LAMS002_REV_A02 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5: Door Hinge

    Hinge mount. Align the Ladder before fully tightening all the fasteners. 17mm DOOR HINGE Mark the left-hand side top & bottom holes on the door as shown. Remove the Ladder and all fasteners. LAMS002_REV_A02 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 6 Nyloc Nuts and M10 Nyloc Nuts. 17mm The Large Washer Plate (Item 26) will only be installed on the inside of the door with Mercedes Sprinter's High Roof and Super High Roof models. LAMS002_REV_A02 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 7 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam Share your adventures on: ©...