Download Print this page
Front Runner LATF001 Installation Instructions Manual

Front Runner LATF001 Installation Instructions Manual

Toyota 4runner 5th gen ladder

Advertisement

Quick Links

ENG
front runner
TOYOTA 4RUNNER (5TH GEN) LADDER
LATF001
READ ME !
Thank you for purchasing Front Runner Toyota 4Runner (5th Gen) Ladder.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
LATF001_REV_A00
1
© 2020 FRONT RUNNER VEHICLE OUTFITTERS

Advertisement

loading
Need help?

Need help?

Do you have a question about the LATF001 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Front Runner LATF001

  • Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
  • Page 2: Tools Needed

    M6 Nut Cap 28 X M6 Nyloc Nut TOOLS NEEDED 28 X M6 Flat Washer Bottom Bracket Bottom Rung 10mm 13mm Middle Rung Joiner Plate Upper Rung De-Natured Alcohol Top LH Ladder Side FIGURE 1.1 LATF001_REV_A00 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 Joiner Plates (Item 12), eight M6x12 Button Head Screws, eight M6 Flat Washers and eight M6 Nyloc Nuts (Item 2, 8 & 7). Finish off by placing eight M6 Nut Caps (Item 6) over the M6 Nyloc Nuts. 10mm LATF001_REV_A00 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 Top Mount Bracket down to secure the bracket to the hatch. Open the rear hatch. Measure 220mm from the outside hatch edge and mark it with masking tape as shown. 220mm LATF001_REV _A00 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5 TIP: Start with the forward LH and RH fasteners, alternating between the fasteners to pull the ladder down evenly. Finish off by placing four M6 Nut Caps (Item 6) over the M6 Nyloc Nuts. LATF001_REV _A00 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 6 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam...